BSS - AR-133 - Active DI Box (New)
ar133
The unit includes phantom power and battery supplies as standard. Should the phantom power from the console fail or be accidentally switched off, the AR-133 automatically switches over to the internal 9V battery providing uninterrupted use.
The unit is housed in a rugged aluminium extrusion case, with robust polyurethane end-cheeks which give the AR-133 a very distinctive look.
Input connectors are both 1/4" jack sockets and an XLR socket, the latter meaning that the AR-133 can be used to convert unbalanced signals to a balanced output on XLRs throughout.
The arched case allows cables to run back underneath the unit from the end for neat cable management.
Input attenuation is 0, -20 or -40dB, making the box suitable for instrument, line or amplifier levels on inputs. On the output side, a ground-lift switch is provided for quick solutions to ground-loop problems.
The AR-133 uses an enhanced version of the same audio path as the AR-116, now regarded by many people as a reference standard. The sound quality is legendary, particularly on acoustic and bass guitars.
Numerous applications can be satisfied by the AR-133. For example, as well as the traditional guitar use, the AR-133 can be used with keyboards, DJ consoles, amplifier outputs, and other electronic sources.
An additional bonus is the ability to use the AR-133 as an active balancing device.
Input Section
Input Impedance | 1M Ohm (pad at 0dB) |
| 47k Ohm (pad at -20dB) |
| 47k Ohm (pad at -40dB) |
|
|
Max Input Level | +9dBu (pad at 0dB) |
| +29dBu (pad at -20dB) |
| +49dBu (pad at -40dB) |
|
|
Connectors | Two Parallel 1/4" jack connectors and a parallel XLR connector (unbalanced) |
|
|
Jack: | Tip Hot (+ve) |
| Sleeve Ground |
|
|
XLR: | Pin 2 Hot (+ve) |
| Pin 1 & 3 Ground |
Output Section
Output | Transformer Balanced |
|
|
Max. Output Level | +8dBu into 600 Ohms or greater |
|
|
Connector | XLR3-32 or equivalent |
System Performance
Distortion (THD) | < 0.005% at 1khz, 0dbu output |
|
|
Noise | < -105db unweighted, 22hz-22khz, rms* |
|
|
Frequency Response | 30Hz to 20kHz, +0dB/-1dB |
General
Main/Standby battery | 9 volt PP3 type, preferably alkaline. |
|
|
Current drain | on phantom - less than 7.5mA |
| on battery - less than 2mA. |
|
|
Phantom Power | +20 volts DC to +48 volts DC |
|
|
Weight | 650 gms, excluding batteries. |
|
|
Overall Dimensions | 59 mm x 124 mm x 143 mm (2.3" x 4.9" x 5.6") |
- Nous n’avons pas encore renseigné ces informations sur le site. Si vous souhaitez les recevoir contactez nous directement par Mail à contact@jsfrance.com
- Nous n’avons pas encore renseigné ces informations sur le site. Si vous souhaitez les recevoir contactez nous directement par Mail à contact@jsfrance.com
- Nous n’avons pas encore renseigné ces informations sur le site. Si vous souhaitez les recevoir contactez nous directement par Mail à contact@jsfrance.com
Warranty
3 ans constructeur.
Satisfied or your money back
You have 10 days to return your purchase.
Online service
Get information (availability, service, order) by writing here.