Your browser does not support JavaScript!


DMX receiver 2.4GHz RF with repeater function (New)

Neuf
.

RecepW-DMXREPE

DMX receiver  2.4GHz RF with repeater function (New)

Description :

Pack including housing-V1 HF-Repeater, two detachable antennas and standard power cord

Specifications:

Product complete with integrated switching alimention.

Power supply: 110-240V 50-60Hz

Consumption: 10mA AC

Dimensions: 120mm X 70mm X 45 mm

RF Sensitivity (2.4Ghz):-90dB

RF power (2.4Ghz) 100mW Peak

Frequency: 31

Universe possible: 31 (15872 DMX channels)

Delivered avec2 antennas and a power cord.

Protocol DMX-A-W2.4EC

The use of wireless products Electroconcept not change the use of your DMX fixtures.

The technology used here gives a transparency between your devices.

The 512 channels are sent. Synchronization frames can have no latency between

the transmitter and the receiver.

 

Each receiver has a memory that is used to return the last value received if there is a

loss of the RF link.

The range depends on the environment around 30M in hostile environments (between walls), and around

600m outdoors.

Each RF receiver is "assigned" a DMX universe, the original one.

The receiver to start scanning frequencies continuously until you find the universe

it is assigned.

Originally your products are delivered to work on one universe and the transmitter emits frequency 31.

 

By activating the repeater will extend the coverage of your W-DMX network. while keeping the receiver function of the product.

 

You can choose between two modes of repetition:

 

Repeat on the same frequency using the available bandwidth.

This mode allows you to be completely transparent with respect to the receiver. and is very convenient for a mobile application. (The receiver does not scan to find the new frequency). Advisor mode is when using a single repeater.

Repetition of the frequency F 1

This mode allows multiple repeaters and avoid "larsen" digital.

if the universe example 1 is output frequency 15, the repeater will follow the signal on the frequency 16, the repeater 17 according to the frequency and so on.In any case receivers will snap the frequency received at the best Scan first.

      Nous n’avons pas encore renseigné ces informations sur le site. Si vous souhaitez les recevoir contactez nous directement par Mail à contact@jsfrance.com
      Nous n’avons pas encore renseigné ces informations sur le site. Si vous souhaitez les recevoir contactez nous directement par Mail à contact@jsfrance.com
  • Warranty

    3 ans constructeur.

  • Satisfied or your money back

    You have 10 days to return your purchase.

  • Online service

    Get information (availability, service, order) by writing here.

88,00 € € HT
105,60 € € TTC
-->

Add to cart
  • Sur demande

Produits Associés

DMX receiver 2.4GHz RF with repeater function (New)Description : Pack including housing-V1 HF-Repeater, two detachable antennas and standard power cord Specifications: Product complete with integrated switching alimention. Power supply: 110-240V 50-60Hz Consumption: 10mA AC Dimensions: 120mm X 70mm X 45 mm RF Sensitivity (2.4Ghz):-90dB RF power (2.4Ghz) 100mW Peak Frequency: 31 Universe possible: 31 (15872 DMX channels) Delivered avec2 antennas and a power cord. Protocol DMX-A-W2.4EC The use of wireless products Electroconcept not change the use of your DMX fixtures. The technology used here gives a transparency between your devices. The 512 channels are sent. Synchronization frames can have no latency between the transmitter and the receiver.   Each receiver has a memory that is used to return the last value received if there is a loss of the RF link. The range depends on the environment around 30M in hostile environments (between walls), and around 600m outdoors. Each RF receiver is "assigned" a DMX universe, the original one. The receiver to start scanning frequencies continuously until you find the universe it is assigned. Originally your products are delivered to work on one universe and the transmitter emits frequency 31.   By activating the repeater will extend the coverage of your W-DMX network. while keeping the receiver function of the product.   You can choose between two modes of repetition:   Repeat on the same frequency using the available bandwidth. This mode allows you to be completely transparent with respect to the receiver. and is very convenient for a mobile application. (The receiver does not scan to find the new frequency). Advisor mode is when using a single repeater. Repetition of the frequency F 1 This mode allows multiple repeaters and avoid "larsen" digital. if the universe example 1 is output frequency 15, the repeater will follow the signal on the frequency 16, the repeater 17 according to the frequency and so on.In any case receivers will snap the frequency received at the best Scan first.Wireless DMX1343 105.60JSFrance0out_of_stock
https://www.jsfrance.comDMX receiver 2.4GHz RF with repeater function (New)