MARTIN - LED RUSH PAR 1 RGBW (New)

The RUSH PAR 1 RGBW is a bright LED PAR Can with premixed RGBW color mixing. It offers electronic dimming and strobe and comes with a flexible bracket for floor or truss mounting.

Features

Bright LED PAR Can

Premixed RGBW color mixing

17° one-tenth peak angle

Electronic dimming and strobe

Flexible bracket – floor or truss-mounted

5-pin XLR

Physical

Length: 260 mm (10.2 in.)

Width: 195 mm (7.7 in.)

Height: 293 mm (11.5 in.)

Weight: 3.6 kg (7.9 lbs.)

Dynamic Effects

Color mixing: RGBW

Color selection: 32 color presets

Electronic dimming: 0 - 100%

Strobe and pulse effects: Variable speed and action, random strobe

Electronic 'shutter' effect: Instant open and blackout

Control and Programming

Control options: DMX, stand-alone

DMX channels: 5/7

Stand-alone trigger options: Music trig, auto trig

White balance control: RGB adjustment

DMX address setting: Control panel with LED display

Stand-alone programming: Control panel with LED display

Protocol: USITT DMX512/1990

Optics

Light source: 7 x 10 W RGBW Cree MC-E LEDs

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer´s test conditions

Construction

Housing: High-impact flame-retardant thermoplastic

Color(s): Black

Protection rating: IP20

Installation

Mounting: Adjustable bracket, surface or truss mount

Orientation: Any

Location: Indoor use only

Connections

AC power in/thru: Neutrik PowerCon

DMX data in/thru: 5-pin XLR

Electrical

AC power: 100-240 V nominal, 50/60 Hz

Typical total power consumption: 78 W

Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Thermal

Cooling: Forced air (temperature-regulated, low noise)

Maximum ambient temperature (Ta max.): 40° C (104° F)

Minimum ambient temperature (Ta min.): 0° C (32° F)

Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 270 BTU/hr.