L-ACOUSTICS - High Power compact subwoofer SB18i (Used)

Description :

The SB18i is the fixed installation subwoofer designed for WST® line sources and coaxial systems, lowering the combined system operating range down to 32 Hz. Its compact size and streamlined rigging make it extremely well suited for flown coupled configurations with KARAi®.

The association of a specifically designed 18’’ transducer with a dual bass-reflex tuned enclosure provides exceptional impact and high sensitivity, low thermal compression and reduced distortion. The vents feature a progressive profile allowing laminar airflow and reduced turbulence noise even at the very highest operating levels. These combined properties contribute to the sonic qualities of the SB18i in terms of precision and musicality.

The control and amplification of the SB18i is managed by either the LA4 or LA8 platform. The onboard DSP filtering encompasses advanced crossover functions, system EQ, and dual thermal and over-excursion protection of the transducer. The L-ACOUSTICS® amplified controllers offer the following drive modes:

• The ‘‘standard’’ mode using SB18i as a companion to KUDO®, KARAi®, KIVA-KILO, ARCS® and featuring a low-pass filter at 60 Hz ([SB18_60] preset) or closely coupled to KARAi®, ARCS® and XTi with a low-pass filter at 100 Hz ([SB18_100] preset).
• The ‘‘cardioid’’ mode using SB18i as a companion to KUDO®, KARAi®, KIVA-KILO, ARCS® and featuring a low-pass filter at 60 Hz ([SB18_60_C] preset) or closely coupled to KARAi®, ARCS® and XTi with a low-pass filter at 100 Hz ([SB18_100_C] preset).

The performance of the SB18i enclosure depends upon the choice of preset and physical system configuration. Made of high grade Baltic birch plywood, the cabinet features a pole mount socket for use with XTi or KIVA enclosures and standard M6 inserts for custom rigging options.

Specifications :

Low frequency limit (-10dB) : 32 Hz ([SB18_100] preset)

Maximum SPL : 136 dB ([SB18_100] preset)

Long term RMS handling capacity : 700 W

ComponentsLF: 1 x 18’’ weather-resistant, (4’’ coil, aluminum die-cast basket, vented magnet design)

Nominal impedance : 8 ohms

Rigging Steel, certified for : 8 SB18i with M-BUMPi (BGV-C1 compliant)

Physical data : W x H x D: 713 x 543 x 700 mm - 28.1 x 21.4 x 27.6 in.

Weight (net) : 50 kg - 110 lbs

Connectors : 2 x 4-point Speakon®

Material : baltic birch plywood

Finish : Grey-brown, RAL 8019® (SB18i) or Pure white RAL 9010® (SB18iW)

Front : polyester powder-coated steel grill, Airnet® acoustically neutral fabric

Rigging : steel with zinc and polyester powder dual coating